Aftermarket wire harness connection was severely corroded causing intermittent connection when wire harness moved. Cleaned up male pins for headlight and used new adapter harness to go from stock harness to aftermarket light. Turning radius issue was due to steering shock absorber being mis-adjusted not allowing full travel from left to right. Adjusted and now good both directions.
Joseph J. gave our service a 5 star review on 3/25/2021
Codes Stored: P0300 Multiple Cylinder Misfire P0430 Catalyst Efficiency below threshold P0522 Oil Pressure Sensor Low Misfire Data showed cylinders 2, 4, and 6 Consistently misfiring and oil pressure light was on. Cleared codes and checked fluids. All looked good fluid wise. Just a build up of moisture in the oil. Codes did not come back after being cleared. Road tested good. Can not duplicate problem. Installed 10 amp fuse to get heat temperature controls working again.
Towed in – AAA
Jeff P. gave our service a 5 star review on 12/13/2019